Available in down, side and top discharge models
Down Discharge Down discharge systems are usually roof mounted, and suitable for both ducted and plenum applications. They represent a very cost effective solution to a cooling problem. A 550mm x 550mm dropper duct serves as both mounting bracket and air distributor.
Top Discharge Top discharge units suit applications where convenient access to a floor mounted air conditioning unit is important, or where the installation requires it.
Side Discharge Side discharge systems may be either wall or floor mounted and are suitable for discharging directly into a wall register. They may also be ducted into a ceiling cavity, depending on the application. Sound attenuation may be required for a single wall register application.
Wall Controller
  • Simple to use
  • Six speeds
  • Off-Fan-Cool modes


  • Specifications for Down and Top discharge models
    Model Down Discharge
    Top Discharge
    FD095

    FT095
    FD125

    FT125
    FD160

    FT160
    FD195

    FT195
    FD230

    FT230
    FD255

    FT255
    Motor - Variable Speed Voltage 220-240 220-240 220-240 220-240 220-240 220-240
    Watts 600 600 750 1000 1000 1000
    Amp Draw low/high 2.65/3.6 2.65/3.6 2.7/3.85 2.9/5.6 2.9/5.6 2.9/5.6
    RPM low/high 600-1370 600-1370 600-1350 850-1410 850-1410 850-1410
    Fan Auswing II 35o x x
    Auswing II 40o x
    Powerflow Fixed Pitch x x x
    Pump - Quietflo 35 LPM x x x x x x
    Filter Media
    (Celdek)
    Number of Pads 4 4 4 4 4 4
    Size mm 830x370 830x460 830x460 830x535 830x650 830x770
    Thickness mm 75 75 100 100 100 100
    Cooling Capacity m3
    (Comcool Zone 2)
    228 300 384 468 552 612
    Design Air Flow m3/hr 7 500 10 000 12 500 15 000 18 000 19 500
    cfm 4 400 5 900 7 400 8 900 10 700 11 600
    Lit/sec 2 100 2 800 3 500 4 200 5 000 5 400
    Depth/Width mm 1090x1090 1090x1090 1090x1090 1090x1090 1090x1090 1090x1090
    Height mm 570 660 660 735 850 970
    Height above dropper mm 310 400 400 475 590 710
    Operating mass kg 82 84.5 86 92.5 94 97.5
    Dropper Duct Size 550x550 550x550 550x550 550x550 550x550 550x550


    Specifications for FS240 Side discharge unit
    FS100 information here
    Model FS240
    Motor - Variable Speed Voltage 220-240
    Watts 1000
    Amp Draw low/high 2.9/5.6
    RPM low/high 850-1410
    Fan Powerflow Fixed Pitch x
    Pump - Quietflo 35 LPM x
    Filter Media - Celdek
    Flute size 7050/45
    Number of Pads 3
    Size mm 3x 830Hx950W
    Thickness mm 100
    Cooling Capacity m3 (Comcool Zone 2) 576
    Design Air Flow m3/hr 18 500
    cfm 11 000
    Lit/sec 5 100
    Depth/Width mm 1090x1090
    Height mm 1320
    Operating mass kg 92




    Actual installation may vary from illustrations.
    Air Group Australia is proud to pursue a policy of continuous development and therefore reserves the right to make product changes without prior notice.