Through the Wall Evaporative Air Conditioner

Interior View The commercial Air S100 "thru-the-wall" air conditioner is designed to cool from 80 to 120 square metres - depending on the application. Through the Wall
It is ideal for offices in a multi-level situation where side wall only access is available. The S100 fits easily into any external wall and discharges air directly through a single wall diffuser. The S100 may also discharge into a duct adaptor for multiple ceiling outlets.

An efficient design means minimum energy loss and maximum air output per kilowatt of energy consumed.


Specifications for FS100 'Through-the-Wall' unit
FS240 side-discharge information here
Model FS100
Motor - Variable Speed Voltage 220-240
Watts 600
Amp Draw low/high 2.65/3.6
RPM low/high 600-1370
Fan Auswing II 40o x
Pump - Quietflo 35 LPM x
Filter Media - Celdek
Flute size 7050/45
Number of Pads 3
Size mm 1x 830Hx930W
2x 270Hx930W
Thickness mm 75
Cooling Capacity m3
(Comcool Zone 2)
240
Design Air Flow m3/hr 8 000
cfm 4 800
Lit/sec 2 200
Depth/Width mm 1090x470
Height mm 1090
Operating mass kg 67.5




Actual installation may vary from illustrations.
Air Group Australia is proud to pursue a policy of continuous development and therefore reserves the right to make product changes without prior notice.